Wednesday, June 16, 2010
Fuel Polishing
The reason for coming to Ess-Kay was to have our fuel polished. When they were ready to accomdate me, I drove the boat over to their service dock. They hooked up the polishing system and 2 hours later, I was good to go. Ethan and Craig went out of their way to make sure every bit of fuel was pumped out of the tanks, filtered and returned to the tanks.
There was no way to tell how much gunk there was, so I hope this system got most of it out.
There was no way to tell how much gunk there was, so I hope this system got most of it out.
Tuesday, June 15, 2010
Ess-Kay Yards
We cannot say enough nice things about this marina and it's owners Kim & Ethan and their 2 daughters.
This boatyard caters to transients boaters....in a big way. They were all out there to greet us when we arrived a few days ago, as they do with each and every boat, they tied us off and made us feel right at home.
There is not as many ammenities as this place as there are at others, but what they do have here is clean, it works, and the grounds are well-maintained. There is a full ship's chandlery, a 75ton travel lift, indoor storage and mechanic's area and a picnic area. They offer a full range of services, specializing in mechanicalwork, and they also offer both gasoline and diesel fuel and a high speed pump out machine. They also have a courtsey car available to all transients. Their prices are fair & reasonable, and they accept all credit cards, etc.
The main portion of the marina is called the basin, and it holds about 30 boats with drafts less than 4 feet.
The outer docks, where we are located, is right on the canal. There are 9 of them, and usually about 7 out of 9 are trawlers doing the Great Loop. Our dock is about 55 feet long and has a depth of about 6.5 feet. We have a wonderful view of the canal and we watch boats coming and going from all parts of the U.S.
Just a 1/4 mile east of us is Oneida Lake and a 1/4 mile west is the famed Winter Harbor Marina.
All I can say is, we really like being here at Ess-Kay, and we have not made any immediate plans to leave.
This boatyard caters to transients boaters....in a big way. They were all out there to greet us when we arrived a few days ago, as they do with each and every boat, they tied us off and made us feel right at home.
There is not as many ammenities as this place as there are at others, but what they do have here is clean, it works, and the grounds are well-maintained. There is a full ship's chandlery, a 75ton travel lift, indoor storage and mechanic's area and a picnic area. They offer a full range of services, specializing in mechanicalwork, and they also offer both gasoline and diesel fuel and a high speed pump out machine. They also have a courtsey car available to all transients. Their prices are fair & reasonable, and they accept all credit cards, etc.
The main portion of the marina is called the basin, and it holds about 30 boats with drafts less than 4 feet.
The outer docks, where we are located, is right on the canal. There are 9 of them, and usually about 7 out of 9 are trawlers doing the Great Loop. Our dock is about 55 feet long and has a depth of about 6.5 feet. We have a wonderful view of the canal and we watch boats coming and going from all parts of the U.S.
Just a 1/4 mile east of us is Oneida Lake and a 1/4 mile west is the famed Winter Harbor Marina.
All I can say is, we really like being here at Ess-Kay, and we have not made any immediate plans to leave.
Friday, June 11, 2010
Canal Trip
Well, after a month of just sitting at the dock we decided we had to make a change. We need to move, to travel a bit and see what other areas have to offer.
We knew from last season that we were going to have to get our fuel polished and the closest marina to us that does that type of work is located in Brewerton, NY on the Erie Canal.
We left our dock at 9AM today and arrived in Brewerton at 6PM. The weather was great with bright sunny skies, temps in the high 70's and winds less than 3 knots.
The trip to Brewerton started out on Sodus Bay to Lake Ontario, then we head east for 30 miles to the Oswego river and Oswego canal. The canal has 7 locks as you proceed south for about another 30 miles, to the Three Rivers Junction. All lock-throughs went well and the boat ran like a charm.
I attribute that to the fact that the waters were so calm that it did not stir up the gunk from the bottoms of the tank.
At Three Rivers Junction we headed east again for 6 miles and passage through one lock to the Ess-Kay Yards marina.
All in all, we covered about 70 miles in 9 hours and burned about 15 gallons of fuel. Not bad for twin engine diesels.
We knew from last season that we were going to have to get our fuel polished and the closest marina to us that does that type of work is located in Brewerton, NY on the Erie Canal.
We left our dock at 9AM today and arrived in Brewerton at 6PM. The weather was great with bright sunny skies, temps in the high 70's and winds less than 3 knots.
The trip to Brewerton started out on Sodus Bay to Lake Ontario, then we head east for 30 miles to the Oswego river and Oswego canal. The canal has 7 locks as you proceed south for about another 30 miles, to the Three Rivers Junction. All lock-throughs went well and the boat ran like a charm.
I attribute that to the fact that the waters were so calm that it did not stir up the gunk from the bottoms of the tank.
At Three Rivers Junction we headed east again for 6 miles and passage through one lock to the Ess-Kay Yards marina.
All in all, we covered about 70 miles in 9 hours and burned about 15 gallons of fuel. Not bad for twin engine diesels.
Subscribe to:
Posts (Atom)
